Created my iCW "Station"

[Mark Tosiello]

After bringing together EhoCW, VoiceMeeter Banana and Mumble, I built an interface for my paddles using the following:

1 - Sewell USB-Serial Adapter (I had this on hand, a similar one is available on Amazon)

1 - 3.5mm Stereo Female Terminal Block panel mount connector

https://www.amazon.com/gp/product/B077XPSKQD/ref=oh_aui_detailpage_...

 1 - DE-9 (DB-9) RS232 Female Soccket Connector to Terminal Block

https://www.amazon.com/gp/product/B075QB33VV/ref=oh_aui_detailpage_...

Using the above it was trivial to create a patch cable for my various paddles. The connectors came in 2 packs, so I'm going to make one for my straight keys as well. Dit -> tip (pin 6), Dah -> Ring (pin 8) and Common -> Sleeve (pin 4).  For Straight keys, pin 4 and pin 6.

Working very well, loopback works well. Looks like I'm all set!

73 de Mark KD8EDC

[Chuck aa0hw]

Hi Mark,

i really like Sonics Audio Repeater...works great on 2 of my windows computers here...

ok on the doing theTEAMVIEWER session...I did not get an alert that you had commented... so - glad i took a look here on the website this evening...

...could you please email me via my QRZ email address and we can continue our discussion and planning via our emails... instead of here on the website...

thanks Mark

chuck

aa0hw