ELF through VLF UNiVERSAL Frequency CONVERTER to Morse Code AUDiO: by STEVE HARRiS's DiODE PROCESSOR

[Chuck aa0hw]

FROM STEVE HARRIS SWH PLUGINS DIODE PROCESSOR 2.32 Diode Processor (diode, 1185) Mangles the signal as if it had been passed through a diode rectifier network.You should probably follow this with a DC offset remover, unless you want the offset. Mode (0 for none, 1 for half wave, 2 for full wave) The mode parameter is continuously variable from thru to half-wave rectification to full-wave to silence. http://plugin.org.uk/ladspa-swh/docs/ladspa-swh.html#tth_sEc2.32 DIODE PROCESSOR prepares incoming ELF/VLF CW signal for the REAGATE plugin's INPUT....output of REAGATE is a midi cw note based on the analysis of the ELF/VLF CW SIGNAL at REAGATE's input port....regate 'key's the next APP a CW KEYER from RECRI KEYER: https://github.com/recri/keyer recri

cw keyboard is the TRANSMITTER at ELF to VLF... output of cw keyboard goes to a TRANSMIT FERRITE ROD ANTENNA... receive ferrite rod antenna is connected to a RAPSBERRY PI's usb sound card's input...pi4 sends the RX ANTENNA SIGNAL, over iP, back to the LAPTOP for input to DIODE PROCESSOR/regate/recri keyer etc... NOTE: bottom scope on video is just 'after' the diode processor plugin