FLdigi is keying a TLC555's pin 4/POS rail to send out a square wave CW NOTE at 1850 hertz - goes to a PI4 usb sound card's LINE INPUT...goes to a HILBERT CELL, then a BANDPASS FILTER(centered at 1850hz) then to a GAIN MODULE(+3db) then to an LO-MIXER that allows you to choose ANY CW PITCH and still keep the bandpass audio filtering bandwidth and "Q" centered at the CW AUDIO FREQUENCY you choose with the LO-MIXER GUI
RECRI KEYER SDR MODULEs: https://github.com/recri/keyer
Views: 63
Tags:
testing OPUS AUDIO CODEC bitrates for Morse Code Audio over iP via SONOBUS
this video is a follow up video from the previous video that is using a 555 square wave oscillator as the 1st part of a keyed sidetone for the input of Sonobus: https://youtu.be/hMdCdJpP1V8 SONOBUS https://sonobus.net/
256K OPUS bitrate seemed to be very close if not equal to the 16 bit PCM uncompressed TRANSMIT option
SonoBus has multiple OPUS and PCM bitrates to choose from for the TRANSMIT STREAM
Comment
© 2024 Created by Chuck aa0hw. Powered by
You need to be a member of QRQcw to add comments!
Join QRQcw