Morse Code FULL DUPLEX *CW Keying DATA* ip Transmitter & ip Receiver - use Zamgate to encode/decode

[Chuck aa0hw]

ZAMGATE SIDECHAIN GATE mode does the ENCODING and DECODING

encoder uses the RECRI OSCILLATOR SDR MODULE at ZERO HERTZ as the CW DATA KEYING INSTRUCTIONS ENCODER https://github.com/recri/keyer

CW RE-KEYER:

ZAMGATE in sidechain MODE      https://www.zamaudio.com/?p=976

[Chuck aa0hw]

3D AUDIO over SONOBUS - 3 CW OPs example - Receiver picks the CW PITCH and 3D placement of each CWop

SONOBUS can fan out each stereo channel into its own audio stream so you can apply DSP effects on each SonoBus output connection independently https://sonobus.net/

Morse Code DEMO - first each CW OP is sending CW at ZERO HERTZ, using the RECRI CW KEYBOARD, AT ZERO HERTZ it creates a WAY for the RECEIVE OP to select what FREQUENCY they want to listen to each CWop at... RECRI KEYER SDR LO-MIXER adjusts the ZERO HERTZ to any CW PITCH desired... https://github.com/recri/keyer

after the LO-MIXER SDR MODULE, it uses a simple STEREO PANNER from AMS - to determine where on the 3d left to right sound stage, you want to place EACH OP being received https://github.com/blablack/ams-lv2