Low Latency REMOTE RiG, FULL DUPLEX, QRQ CW operations: 2 WAY audio, via Raspberry Pi interface & open source software

QRQ CW example, by, AUDIO OVER iP via a GSTREAMER raspberry pi TCP AUDIO SERVER and a GSTREAMER laptop TCP AUDIO CLIENT, organized by two PYTHON scripts.

- you can download the TCP SERVER and CLIENT python scripts here:

PYTHON/gstreamer TCP SERVER:

https://u.pcloud.link/publink/show?code=XZBCNoVZhgQdEcKxlnpV83yxEcb...

PYTHON/gstreamer TCP CLIENT:

https://u.pcloud.link/publink/show?code=XZsCNoVZbun58NEdIzHmWwnK0h5...

NOTE:  the PTT tone(5555hz) does not get transmitted, since the K3S has a brick wall low pass filter at 4Khz...only a tiny volume of 5555hz audio tone is needed to activate the RIG's transmit vox circuit...and is easily filtered out by a BAND-REJECT filter at the REMOTE OP's PC RECRI KEYER(github) provided all the CW SOFTWARE in this demo: https://github.com/recri/keyer

Views: 39

Comment

You need to be a member of QRQcw to add comments!

Join QRQcw

© 2024   Created by Chuck aa0hw.   Powered by

Badges  |  Report an Issue  |  Terms of Service