Chuck aa0hw's Blog – October 2016 Archive (3)

QRQ CW(120wpm) over PCMA G.711 CODEC using Ekiga

The ability of the A-law PCMA G.711 audio codec to transmit extreme qrq cw audio tones over the internet, is tested using the SIP VOIP CLIENT Ekiga. https://ekiga.im/

FLdigi sends a text at 120 wpm from TOM's famous qrq cw article:

https://sites.google.com/site/tomw4bqf/copyingcwover70wpm

to the input of Ekiga, and Ekiga is connected to an ECHO REFLECTOR so you can hear your…

Continue

Added by Chuck aa0hw on October 26, 2016 at 1:07pm — No Comments

QRQ CW over iLBC (internet Low Bitrate Codec) using LINPHONE

Testing the ability of iLBC (internet Low Bitrate Codec) to transmit and receive morse code audio tones over the internet with low bandwidth used and good packet loss concealment. By itself, this codec does not make for pleasant copy, however, if the received tone is regenerated, the iLBC CODEC seems to provide a highly dependable internet audio stream of full duplex morse code audio notes...for a QSO between 2 or more cw ops over the internet with low latency - and good qsk -…

Continue

Added by Chuck aa0hw on October 25, 2016 at 11:42am — No Comments

Morse Code over SIP voip call: 4 different audio codecs compared for morse tone quality

Using 2 seperate Jitsi voip clients/computers, that were connected to each other over the internet, this video demonstrates the audio quality of the morse code audio tones as they are transmitted from one SIP CLIENT to the other SIP CLIENT over the Session Initiation Protocol / VOIP / internet pathways. 



Codecs tested for morse code audio quality are:

1. iLBC / 8000

2. Silk / 8000

3. G722 /…

Continue

Added by Chuck aa0hw on October 24, 2016 at 10:47am — No Comments

Monthly Archives

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

© 2024   Created by Chuck aa0hw.   Powered by

Badges  |  Report an Issue  |  Terms of Service